Children’s Create & Paint Your Own Transport Models Kit

How to Use: Kids Create Mould and Paint Make Your Own Transport Figurines

Materials Needed

• Mould and Paint Kit
• Water
• Old Newspapers or Protective Sheet
• Paintbrushes (included in the kit)
• Paints (included in the kit)
• Mixing Bowl
• Stirring Stick

Setting Up

1. Lay down old newspapers or a protective sheet on your workspace to avoid any mess.
2. Gather all the materials listed above.

Preparing the Mould

1. Open the mould provided in the kit and ensure it is clean and dry.
2. Lightly dust the inside of the mould with flour or talcum powder to help with easy release later.

Mixing the Plaster

1. In a mixing bowl, combine the plaster powder from the kit with the specified amount of water. Refer to the kit instructions for the correct ratio.
2. Stir the mixture well until it reaches a smooth, lump-free consistency.

Filling the Mould

1. Carefully pour the plaster mixture into the mould, filling it completely.
2. Tap the mould gently on the surface to release any air bubbles.
3. Let the plaster set for the recommended time, usually around 30-60 minutes.

Removing the Figurine

1. Once the plaster has set and hardened, gently remove the figurine from the mould.
2. If there are any rough edges, you can smooth them out with fine sandpaper.

Painting the Figurine

1. Use the paintbrushes and paints provided in the kit to decorate your transport figurine.
2. Let your creativity flow and paint details as you see fit.
3. Allow the paint to dry completely before handling or displaying your figurine.

Displaying Your Creation

• Once dry, your transport figurine is ready to be displayed or gifted.
• Consider placing it on a shelf, desk, or any area where it can be admired.