CHALLENGE 20MM VENEER PINS, 75G

How to Use Challenge Moulding / Veneer Pins 20mm 75g

Introduction

Challenge Moulding / Veneer Pins are ideal for securing thin pieces of wood or veneer in woodworking projects. Follow these instructions to use them effectively.

Materials Needed

• Challenge Moulding / Veneer Pins 20mm 75g
• Hammer
• Woodworking project pieces (e.g., veneer, moulding)
• Protective gloves (optional)

Steps to Use

1. Prepare the Workspace

• Ensure your workspace is clean and free of debris.
• Gather all necessary tools and materials listed above.

2. Position the Pieces

• Align the pieces of wood or veneer you wish to join.
• Make sure the surfaces are flush and properly positioned.

3. Insert the Pins

• Hold a pin in place where you want to join the pieces.
• Use a hammer to gently tap the pin into the wood.
• Ensure the pin is inserted straight to avoid splitting the wood.

4. Secure the Joint

• Continue inserting pins along the joint every few inches for stability.
• Check that all pins are flush with the wood’s surface.

Tips for Beginners

• If you’re new to woodworking, practice on scrap wood first.
• Use protective gloves to avoid injury during the process.
• Consider using a nail set to drive the pins below the surface if needed.

Safety Precautions

• Wear safety goggles to protect your eyes from flying debris.
• Use the hammer with care to avoid injury.