Challenge 15mm Galvanised Felt Nails – 225g

How to Use Challenge Galvanised Felt Nails 15mm 225g

Introduction

Challenge Galvanised Felt Nails are commonly used in roofing projects to secure roofing felt. This guide will provide step-by-step instructions for beginners on how to use these nails effectively.

Materials Needed

• Challenge Galvanised Felt Nails 15mm 225g
• Hammer
• Roofing felt
• Measuring tape
• Roofing surface (e.g., wooden roof deck)
• Protective gear (e.g., gloves, safety goggles)

Preparation

1. Put on your protective gear to ensure safety while working.
2. Measure and cut the roofing felt to the required size using measuring tape.
3. Position the felt over the roofing surface, ensuring it is aligned correctly.

Nailing the Felt

1. Begin at one corner of the roofing surface.
2. Hold the felt in place and position a nail about 2 cm from the edge of the felt.
3. Using the hammer, gently tap the nail until it penetrates the felt and is secured into the roofing surface.
4. Continue nailing along the edge, spacing nails approximately 15-20 cm apart for optimal hold.
5. Once the perimeter is secure, add additional nails in a grid pattern across the middle of the felt for added stability.

Finishing Up

1. Inspect the felt to ensure all edges and areas are securely nailed down.
2. Make any necessary adjustments if there are loose spots.
3. Clean up any debris or leftover materials from the workspace.

Safety Tips

• Always wear safety goggles to protect your eyes from flying debris.
• Ensure the ladder or scaffolding is stable when working at heights.
• Be cautious of sharp edges on the nails and handle them carefully.

By following these instructions, you will be able to use Challenge Galvanised Felt Nails effectively in your roofing projects.