Blackspur 20″ Bicycle Inner Tube

How to Use the Blackspur Bicycle Inner Tube 20″

Step 1: Gather Necessary Tools and Materials

• Blackspur Bicycle Inner Tube 20″
• Bicycle tire levers
• Bicycle pump
• Wrench (if needed for wheel removal)

Step 2: Remove the Wheel

1. Shift the bicycle to the lowest gear if you’re working on the rear wheel.
2. Release the brakes if they obstruct wheel removal.
3. Use a wrench to loosen the nuts or quick-release lever to remove the wheel from the bicycle.

Step 3: Remove the Tire

1. Insert a tire lever between the tire and the rim.
2. Leverage the tire lever to lift the tire bead over the rim edge.
3. Slide the tire lever along the rim to fully detach one side of the tire.

Step 4: Remove the Old Inner Tube

1. Pull out the valve stem from the rim.
2. Carefully remove the inner tube from within the tire.

Step 5: Install the New Inner Tube

1. Partially inflate the new inner tube to give it shape.
2. Insert the valve stem into the rim hole.
3. Place the inner tube inside the tire, ensuring it is not twisted.

Step 6: Reinstall the Tire

1. Push the tire bead back over the rim edge using your hands or tire lever.
2. Ensure the inner tube is not pinched between the tire and rim.

Step 7: Inflate the Tire

1. Use a bicycle pump to inflate the tire to the recommended pressure.
2. Check for any leaks or bulges in the tire.

Step 8: Reinstall the Wheel

1. Place the wheel back onto the bicycle frame.
2. Tighten the nuts or secure the quick-release lever.
3. Re-engage the brakes.

Step 9: Final Check

• Spin the wheel to ensure it is properly seated and balanced.
• Take a short test ride to confirm that everything is functioning correctly.