Black 6-Inch Square Gully Grid

Description

How to Use the Square Gulley Grid Black 6-Inch

Introduction

The Square Gulley Grid is designed to fit over drainage channels to prevent debris from entering while allowing water to flow through. Follow these instructions to properly install and use the product.

Requirements

• Square Gulley Grid Black 6-Inch
• Protective gloves
• Screwdriver (if necessary)

Installation Steps

1. Prepare the Area:
   • Clear any debris from the drainage area where the gulley grid will be installed.
   • Ensure the surface is clean and dry for proper placement.
2. Position the Grid:
   • Place the Square Gulley Grid over the drainage opening.
   • Ensure it fits snugly and covers the entire opening.
3. Secure the Grid:
   • If the grid comes with screws or attachments, use a screwdriver to secure it in place.
   • Ensure it is firmly attached and does not wobble.
4. Test Water Flow:
   • Pour a small amount of water over the grid to ensure it flows through efficiently.
   • Check that no debris is obstructing the flow underneath the grid.

Maintenance Tips

• Regularly inspect the grid for any blockages or debris buildup.
• Clean the grid periodically with water and a brush to maintain optimal performance.
• Replace the grid if any damage or wear is observed to ensure continued effectiveness.

Safety Precautions

• Wear protective gloves when handling the grid to avoid injury.
• Ensure that the grid is securely fastened to prevent tripping hazards.