BELL LIGHTING 100W E27 ES PEARL GLS LIGHT BULB

How to Use the BELL LIGHTING 100W E27 ES PEARL GLS BULB

Step 1: Safety Precautions

• Ensure the power is switched off before installing or removing the bulb to prevent electric shock.
• Avoid touching the bulb with bare hands, especially if it’s still hot.
• Check that the fixture is compatible with a 100W E27 ES bulb.

Step 2: Installation

• Locate the light fixture where the bulb will be installed.
• If replacing an old bulb, carefully remove it by unscrewing counterclockwise.
• Take the new BELL LIGHTING 100W E27 ES PEARL GLS Bulb and screw it into the fixture clockwise until secure.
• Ensure the bulb is firmly secured in the socket but avoid over-tightening.

Step 3: Testing the Bulb

• Once installed, switch the power back on.
• Turn on the light switch to test the bulb.
• If the bulb does not light up, switch off the power and check the installation for any loose connections.

Step 4: Disposal

• When the bulb reaches the end of its life, switch off the power and carefully unscrew it from the fixture.
• Dispose of the bulb according to local regulations for waste disposal.
• Consider recycling options if available in your area.

Troubleshooting Tips

• If the bulb flickers, check for loose connections in the socket or power supply issues.
• Ensure that the bulb is not used in a fixture with higher wattage exceeding the bulb’s rating.