Bartoline Waterproof Fix and Grout, Ready to Use, 250g Tube

Description

How to Use Bartoline Ready to Use Fix and Grout Waterproof 250gm Tube

Materials Needed

• Bartoline Ready to Use Fix and Grout Waterproof 250gm Tube
• Putty knife or grout float
• Clean cloth or sponge
• Water (for cleaning)

Preparation

1. Ensure the surface to be grouted is clean, dry, and free from dust, grease, or any loose particles.
2. If necessary, remove old grout or adhesive using appropriate tools.

Application

1. Open the Bartoline grout tube by removing the cap and cutting the nozzle to the desired size.
2. Apply a small amount of grout onto the putty knife or grout float.
3. Spread the grout over the surface, pressing it firmly into the joints between tiles.
4. Use the knife or float to remove excess grout, ensuring the joints are fully filled and smooth.

Finishing

1. Allow the grout to set for a few minutes, then wipe the tiles’ surface with a damp cloth or sponge to remove any grout residue.
2. Be careful not to disturb the grout in the joints while cleaning.
3. Let the grout cure completely as per the product instructions, usually 24 hours, before exposing it to water.

Cleaning Up

• Clean all tools and equipment immediately after use with water.
• Store any remaining grout in a cool, dry place with the cap securely fastened.

Tips for Best Results

• Test on a small, inconspicuous area first to ensure compatibility with your tiles.
• Avoid using the product in extreme temperatures or wet conditions during application.