Bartoline Adhesive for Borders and Overlaps, 250g Tube

Description

How to Use Bartoline Border and Overlap Adhesive 250gm Tube

Materials Needed

• Bartoline Border and Overlap Adhesive 250gm Tube
• Wallpaper brush or roller
• Wallpaper or border to be attached
• Clean cloth
• Scissors or wallpaper knife

Step-by-Step Instructions

1. Prepare the Surface

• Ensure the wall surface is clean, dry, and free from dust or grease.
• If necessary, wipe the surface with a damp cloth and allow it to dry completely.

2. Cut the Wallpaper or Border

• Measure the length of the wall or area where the wallpaper or border will be applied.
• Cut the wallpaper or border to the required length using scissors or a wallpaper knife.

3. Apply the Adhesive

• Open the Bartoline Border and Overlap Adhesive tube.
• Apply a thin, even layer of adhesive to the back of the wallpaper or border using a wallpaper brush or roller.
• Make sure to cover all edges and corners thoroughly.

4. Position the Wallpaper or Border

• Carefully position the wallpaper or border on the wall, aligning it as desired.
• Press firmly starting from the center and work your way outward to remove any air bubbles.

5. Secure the Edges

• Ensure all edges and seams are properly adhered to the wall.
• If necessary, apply a little more adhesive to any loose edges and press down firmly.

6. Clean Up

• Wipe away any excess adhesive with a clean cloth before it dries.
• Close the adhesive tube securely for future use.

Tips for Best Results

• Work in a well-ventilated area to ensure the adhesive dries promptly.
• Follow the manufacturer’s instructions for optimal results.
• Test a small area first if using on delicate surfaces.