AV:LINK 10.0M Speaker Cable with 2 x 13 Strands

Description

How to Use the AV:LINK Speaker Cable

Introduction

The AV:LINK Speaker Cable is a versatile and economical solution for audio installations in both domestic and commercial settings. Follow these steps to effectively use the speaker cable in your audio setup.

Materials Needed

• AV:LINK Speaker Cable 2 x 13 Strand 10.0M
• Wire cutters/strippers
• Screwdriver (if needed for speaker terminals)
• Speakers
• Amplifier or audio receiver

Steps to Connect Your Speaker Cable

1. Prepare the Cable

• Measure the distance between your amplifier/receiver and the speakers to determine the necessary length of cable.
• Use wire cutters to cut the speaker cable to the desired length.

2. Strip the Wire

• Use wire strippers to remove about 1/2 inch of insulation from the ends of the speaker cable, exposing the copper strands.
• Be careful not to damage the copper strands while stripping the wire.

3. Connect to the Amplifier/Receiver

• Locate the speaker output terminals on your amplifier or receiver.
• Insert the stripped end of one wire into the positive (+) terminal and the other wire into the negative (-) terminal.
• Tighten the terminal screws or use the spring clips to secure the wires.

4. Connect to the Speakers

• Locate the input terminals on your speakers.
• Insert the corresponding stripped wire into the positive (+) terminal and the other wire into the negative (-) terminal.
• Ensure the connections are secure and that there are no loose strands of wire.

5. Test the Connection

• Power on your amplifier or receiver and play some audio to test the speaker connection.
• Ensure that the sound is clear and that there is no distortion or interference.

Troubleshooting

• If there is no sound, double-check all connections to ensure they are secure.
• Make sure the amplifier/receiver is set to the correct input source and that the volume is turned up.
• Inspect the speaker cable for any breaks or damage.

Conclusion

The AV:LINK Speaker Cable allows for easy and effective audio setup. By following these instructions, you can ensure proper connection and enjoy high-quality sound in your audio system.