AUTO EXTREME AX SILVER ALLOY WHEEL SPRAY PAINT FOR AUTOMOTIVE USE, 300ML

Description

How to Use AUTO EXTREME AUTOMOTIVE AX SILVER ALLOY WHEEL SPRAY PAINT 300ML

Preparation

• Ensure you are in a well-ventilated area or outdoors.
• Wear protective gear, including gloves and a mask, to avoid inhaling fumes.
• Clean the wheels thoroughly to remove dirt, grease, and old paint.
• Dry the wheels completely and mask off areas that you do not want to paint using tape and newspaper.

Application

• Shake the can vigorously for at least 2-3 minutes to ensure even mixing.
• Hold the can approximately 25-30 cm (10-12 inches) away from the wheel surface.
• Apply thin, even coats using a steady back-and-forth motion.
• Allow each coat to dry completely before applying the next. It is recommended to wait about 10-15 minutes between coats.
• Apply 2-3 coats for optimal coverage and finish.

Drying and Finishing

• Allow the paint to dry for at least 24 hours before handling the wheels.
• Remove all masking materials carefully to avoid damaging the paint.
• Inspect the wheels for any missed spots or uneven areas and touch up if necessary.

Safety Tips

• Avoid spraying near an open flame or sparks as the contents are flammable.
• Store the can in a cool, dry place away from direct sunlight.
• Dispose of the empty can responsibly, following local regulations.