AUTO EXTREME AUTOMOTIVE RED PRIMER SPRAY PAINT 250ML – AX

Description

How to Use AUTO EXTREME AUTOMOTIVE AX RED PRIMER SPRAY PAINT 250ML

Preparation

• Ensure that you are in a well-ventilated area or outdoors.
• Wear protective gear such as gloves and a mask to avoid inhalation and skin contact.
• Clean the surface that you will be painting. Remove any rust, dirt, or grease.
• Sand the surface lightly to ensure better adhesion of the primer.
• Shake the can vigorously for about 1-2 minutes to ensure the paint is well mixed.

Application

• Hold the can approximately 20-30 cm (8-12 inches) from the surface.
• Start spraying with a steady motion, slightly overlapping each pass to ensure even coverage.
• Apply multiple thin coats rather than one thick coat to prevent drips and ensure a smooth finish.
• Allow each coat to dry for about 10-15 minutes before applying the next coat.

Finishing

• Once you have applied the desired number of coats, allow the primer to dry completely.
• Check for any uneven spots and lightly sand if necessary before applying the topcoat.
• Clean the spray nozzle by inverting the can and spraying until only clear gas comes out.
• Store the can in a cool, dry place away from direct sunlight.

Safety Precautions

• Always read and follow the instructions on the can label before use.
• Do not use the product near open flames or sources of ignition.
• Keep out of reach of children and pets.