AUTO EXTREME 400ML SILVER WHEEL GLOSS SPRAY PAINT

Description

How to Use AUTO EXTREME GLOSS SILVER WHEEL SPRAY PAINT 400ML

Materials Needed

• AUTO EXTREME GLOSS SILVER WHEEL SPRAY PAINT 400ML
• Protective gloves
• Face mask
• Safety goggles
• Drop cloth or newspaper
• Masking tape
• Sandpaper or wire brush
• Clean cloth
• Primer (optional)

Preparation

1. Work in a well-ventilated area to ensure safety from fumes.
2. Use a drop cloth or newspaper to protect the surrounding area from paint overspray.
3. Clean the wheels thoroughly with a clean cloth to remove dirt and grease.
4. Sand the wheel surface with sandpaper or use a wire brush to remove any rust or old paint.
5. Wipe the surface again to remove any dust from sanding.
6. Use masking tape to cover areas you do not want to paint.
7. Apply a primer if necessary and allow it to dry completely according to the manufacturer’s instructions.

Application

1. Shake the can of AUTO EXTREME GLOSS SILVER WHEEL SPRAY PAINT for at least 2 minutes to ensure the paint is well-mixed.
2. Hold the can approximately 25-30 cm (10-12 inches) away from the wheel surface.
3. Spray in a steady, back-and-forth motion, slightly overlapping each stroke to ensure even coverage.
4. Apply multiple thin coats rather than one thick coat to prevent dripping. Allow each coat to dry before applying the next.
5. Refer to the can instructions for specific drying times between coats.

Finishing

1. Once the final coat is dry, remove any masking tape carefully.
2. Inspect the paint job for any missed spots or imperfections and touch up if necessary.
3. Allow the paint to cure fully before handling or mounting the wheels.

Safety Tips

• Wear protective gloves, a face mask, and safety goggles during the process.
• Avoid inhaling fumes by ensuring proper ventilation.
• Keep the spray can away from open flames and heat sources.

By following these instructions, you can achieve a professional-looking finish on your wheels with AUTO EXTREME GLOSS SILVER WHEEL SPRAY PAINT 400ML.