AMTECH 230MM / 9″ METAL CUTTING DISC

How to Use the AMTECH Metal Cutting Disc 230MM / 9″

Safety Precautions

• Ensure you are over 18 years of age to use this product.
• Wear appropriate personal protective equipment (PPE) such as safety goggles, gloves, and a dust mask.
• Make sure the work area is clean and free from any flammable materials.
• Always read and follow the manufacturer’s instructions and safety guidelines.

Preparing the Equipment

• Ensure that the power tool is compatible with a 230mm / 9″ cutting disc.
• Disconnect the power tool from any power source before starting the setup.
• Attach the cutting disc securely to the power tool, following the tool’s manual for guidance.
• Check that the disc is properly mounted and there are no visible damages or cracks.

Using the Cutting Disc

• Secure the metal piece you are going to cut, using a vise or clamps to prevent movement.
• Reconnect the power tool to the power source.
• Hold the tool firmly with both hands and maintain a stable stance.
• Turn on the power tool and allow the disc to reach full speed before starting the cut.
• Gently lower the disc onto the metal, applying steady and even pressure.
• Move the disc along the cutting line smoothly and avoid forcing it through the material.

Post-Use Maintenance

• Turn off the power tool and disconnect it from the power source.
• Allow the cutting disc to cool down before handling it.
• Inspect the disc for any wear or damage and replace it if necessary.
• Store the cutting disc in a dry and safe place away from children.