AM-TECH Extra Long 3-Piece Driver Set

How to Use the AM-TECH 3 Pieces Extra Long Driver Set

Introduction

The AM-TECH 3 Pieces Extra Long Driver Set is designed to help you reach and drive screws in hard-to-reach areas. Follow the instructions below to make the most out of your driver set.

Contents of the Set

• 1 x Phillips Extra Long Driver
• 1 x Flathead Extra Long Driver
• 1 x Torx Extra Long Driver

Step-by-Step Instructions

Step 1: Identify the Screw Type

• Determine whether the screw you are working with is a Phillips, Flathead, or Torx.
• Select the corresponding driver from the set.

Step 2: Safety Precautions

• Ensure you have a stable working environment to prevent accidents.
• Wear safety goggles if necessary to protect your eyes from debris.

Step 3: Using the Driver

• Grip the handle of the selected driver firmly.
• Align the tip of the driver with the screw head.
• Apply gentle pressure and turn the driver clockwise to tighten the screw.
• To loosen a screw, turn the driver counterclockwise.

Step 4: After Use

• Wipe the drivers clean with a dry cloth to remove any debris.
• Store the driver set in a dry place to prevent rust.

Troubleshooting Tips

• If the driver slips, ensure it is properly aligned with the screw head.
• Apply steady pressure to avoid stripping the screw.

Conclusion

With these steps, you can effectively use the AM-TECH 3 Pieces Extra Long Driver Set for various DIY projects. Always prioritize safety and select the right tool for the job.