AM-TECH 4-Inch Wire Wheel Brush for Drill

How to Use the AM-TECH 4″ Wire Wheel Brush Drill

Materials Needed

• AM-TECH 4″ Wire Wheel Brush
• Drill
• Protective Gear (Gloves, Safety Goggles)
• Workpiece (Metal, Wood, etc.)

Safety Precautions

• Ensure you are wearing appropriate protective gear.
• Work in a well-ventilated area.
• Secure the workpiece properly to avoid movement during operation.

Installation

1. Disconnect the drill from any power source.
2. Loosen the chuck of the drill by rotating it counterclockwise.
3. Insert the shank of the wire wheel brush into the chuck.
4. Tighten the chuck by rotating it clockwise to secure the brush.
5. Ensure the wire wheel is firmly attached before use.

Operation

1. Plug in or insert the battery into your drill.
2. Hold the drill with a firm grip.
3. Turn on the drill to the desired speed setting.
4. Gently apply the wire wheel to the surface of the workpiece.
5. Move the brush in a smooth, consistent motion for even results.

After Use

• Turn off the drill and disconnect it from the power source.
• Loosen the chuck and remove the wire wheel brush.
• Clean the wire wheel brush with a dry cloth to remove debris.
• Store the tool in a dry, safe place.