Adjustable Anvil Lopper Garden Pruner (Extends from 64cm to 95cm)

How to Use the Telescopic Anvil Lopper Garden Pruner

Introduction

The Telescopic Anvil Lopper is designed for pruning branches and stems in your garden. Follow these instructions to ensure safe and effective use.

Important Safety Information

• Ensure you are over 18 years of age to use this tool.
• Wear protective gloves and goggles to prevent injuries.
• Inspect the lopper for any damage before use.
• Keep fingers away from the cutting blade.

Steps to Use the Telescopic Anvil Lopper

Adjusting the Length

1. Hold the handles firmly.
2. Locate the telescopic adjustment mechanism on the handles.
3. Twist or unlock the mechanism to extend the handles to the desired length between 64cm and 95cm.
4. Secure the mechanism to lock the handles in place.

Pruning Branches

1. Position the anvil lopper around the branch you wish to cut.
2. Ensure the branch fits completely between the blade and anvil for a clean cut.
3. Squeeze the handles together with steady pressure until the branch is cut.
4. Release the handles gently after the cut is complete.

After Use

• Wipe the blade clean with a cloth to remove sap and debris.
• Apply a light coat of oil to the blade to prevent rust.
• Store the lopper in a dry place, preferably hanging or in a secure tool rack.

Maintenance Tips

• Regularly check the blade for sharpness and sharpen if necessary.
• Inspect the telescopic mechanism and lubricate if it becomes difficult to adjust.
• Tighten any loose screws or bolts.

Troubleshooting

• Difficulty cutting: Ensure the blade is sharp and the branch is within the lopper’s capacity.
• Handles not locking: Check the adjustment mechanism for debris or damage.