A case of PVC adhesive wallpaper with a wooden design typically includes six rolls, each measuring 2 meters in length and 45 centimeters in width. This type of wallpaper is…

How to Use PVC Adhesive Wallpaper Wooden Design

Materials Needed

• PVC Adhesive Wallpaper Wooden Design
• Measuring tape
• Scissors or a utility knife
• Squeegee or cloth
• Level (optional)
• Pencil

Preparation

1. Ensure the surface you are applying the wallpaper to is clean, dry, and free from dust or grease.
2. Measure the area where you want to apply the wallpaper.
3. Cut the wallpaper to the required size using scissors or a utility knife, leaving a little extra on the edges for trimming.
4. Mark straight guidelines on the wall using a pencil and level if needed to ensure proper alignment.

Application

1. Peel off a small section of the backing paper from the adhesive side of the wallpaper.
2. Align the wallpaper with your guidelines and stick the exposed adhesive section onto the surface.
3. Slowly peel away more of the backing paper as you smooth the wallpaper onto the surface using a squeegee or cloth.
4. Work from the center outward to remove air bubbles and ensure a smooth application.
5. If necessary, use the squeegee to push out any remaining air bubbles by working toward the edges.

Finishing Touches

1. Once the wallpaper is applied, trim any excess from the edges with a utility knife for a clean finish.
2. Inspect the applied wallpaper to ensure there are no air bubbles or misalignments.
3. Repeat the above steps for additional sections, ensuring patterns align if applicable.

Troubleshooting

• If air bubbles are trapped, gently lift the wallpaper and reapply, smoothing out bubbles with a squeegee.
• For corners and edges, make small cuts to help the wallpaper lay flat without overlapping.

Enjoy your newly designed space with the PVC Adhesive Wallpaper Wooden Design!