85ml Supa-Coat Gold Lacquer Spray

How to Use SUPA-COAT GOLD LACQUER SPRAY 85ML

Step 1: Preparation

• Ensure you are in a well-ventilated area to avoid inhalation of fumes.
• Lay down protective coverings to avoid overspray on unwanted surfaces.
• Shake the can well for at least 2 minutes to mix the lacquer properly.
• Test spray on a small inconspicuous area to ensure compatibility.

Step 2: Application

• Hold the can approximately 15-20 cm (6-8 inches) away from the surface.
• Spray in a steady, back-and-forth motion, slightly overlapping each stroke for an even coat.
• Apply multiple thin layers rather than one thick layer to prevent drips and runs.
• Allow each coat to dry completely before applying the next one (follow the drying time as specified on the can).

Step 3: Drying and Curing

• Once the final coat is applied, allow the item to dry thoroughly.
• For optimal results, let the lacquer cure for the time recommended on the product packaging.

Step 4: Clean-Up

• Clean the spray nozzle by turning the can upside down and spraying until only clear gas comes out.
• Store the can in a cool, dry place away from direct sunlight and heat sources.

Safety Precautions

• Wear protective gloves and a mask during application to prevent skin contact and inhalation.
• Keep out of reach of children and pets.
• Do not puncture or incinerate the can, even when empty.
• Follow any additional safety instructions on the product label.