75mm / 3 Inch Invisible Disc Adhesive Plate Hanger
Roll over image to zoom in
How to Use the Invisible Disc Adhesive Plate Hanger
Materials Needed
- Invisible Disc Adhesive Plate Hanger (75mm / 3 inch)
- Clean cloth
- Water
- Plate
Step-by-Step Instructions
Step 1: Prepare the Plate
- Ensure the plate is clean and dry before applying the hanger.
- Use a clean cloth to wipe any dust or grease from the back of the plate.
Step 2: Activate the Adhesive
- Moisten the back of the adhesive hanger with a little water.
- Make sure the entire adhesive surface is slightly damp but not soaking wet.
- Wait for about 3-5 minutes to allow the adhesive to become tacky.
Step 3: Attach the Hanger to the Plate
- Carefully center the adhesive disc on the back of the plate.
- Press firmly to ensure full contact with the plate.
- Let the adhesive dry completely for at least 24 hours to ensure a strong bond.
Step 4: Hang the Plate
- Choose a suitable wall hook or nail that can support the weight of the plate.
- Hang the plate using the loop on the adhesive disc.
- Ensure the plate is secure and level on the wall.
Additional Tips
- Do not try to reposition the hanger once it is attached to the plate.
- For best results, follow the drying time strictly.
- Test the security of the hanger by gently pulling on it before hanging.
Loading...
Reviews
There are no reviews yet.