5-Pack Hollow Door Fixings by PLASPLUGS

Description

How to Use Plasplugs Hollow Door Fixings

Introduction

Plasplugs Hollow Door Fixings are designed to provide a secure method for hanging items on hollow doors. Follow these instructions to ensure proper installation and use.

Tools Required

• Drill
• Drill bit (according to the size of the fixing)
• Screwdriver
• Pencil

Step-by-Step Instructions

Step 1: Mark the Position

1. Use a pencil to mark the spot on the hollow door where you wish to insert the fixing. Ensure that this spot is free from any obstructions or internal structures.

Step 2: Drill a Hole

1. Select a drill bit that matches the size of the fixing.
2. Carefully drill a hole at the marked position. Ensure the hole is drilled straight to avoid damaging the door.

Step 3: Insert the Fixing

1. Take the hollow door fixing and push it into the drilled hole until it is flush with the door surface.
2. If necessary, use a hammer gently to tap it into place.

Step 4: Secure the Fixing

1. Using a screwdriver, tighten the screw provided with the fixing. This will expand the fixing inside the hollow door, securing it in place.

Step 5: Attach Your Item

1. Once the fixing is secure, attach your desired item by aligning it with the fixing and tightening the screw.

Safety Tips

• Ensure the item you are hanging does not exceed the weight capacity of the fixings.
• Wear safety goggles while drilling to protect your eyes.

Troubleshooting

If the fixing does not hold securely, verify that the correct drill bit size was used and that the hole was drilled straight. Re-drill and insert a new fixing if necessary.