4 Your Home Vacuum Cleaner Replacement Drive Belts 1912508800 & 1912737200 – Pack of 2

How to Use 4 YOUR HOME VAC REP. VACCUM CLEANER DRIVER BELTS 1912508800 & 1912737200 2/PK

Introduction

This guide will help you replace the vacuum cleaner driver belts for your specific vacuum model using the 4 YOUR HOME replacement belts.

Tools You Will Need

• Screwdriver
• Clean cloth

Steps to Replace the Vacuum Cleaner Driver Belt

Step 1: Unplug the Vacuum Cleaner

• Ensure the vacuum cleaner is turned off and unplugged from the power source to avoid any accidents.

Step 2: Access the Brush Roll

• Turn the vacuum cleaner over to access the bottom plate.
• Use a screwdriver to remove the screws securing the bottom plate.
• Carefully remove the bottom plate to expose the brush roll and belt.

Step 3: Remove the Old Belt

• Note the position of the current belt on the brush roll and motor shaft.
• Slide the old belt off the brush roll and motor shaft.

Step 4: Install the New Belt

• Take one of the new belts from the package.
• Loop the new belt around the motor shaft.
• Stretch the belt and loop it over the brush roll.
• Ensure the belt is aligned correctly and not twisted.

Step 5: Reassemble the Vacuum Cleaner

• Place the bottom plate back over the brush roll.
• Secure the bottom plate with screws using the screwdriver.

Step 6: Test the Vacuum Cleaner

• Plug the vacuum cleaner back into the power source.
• Turn it on to ensure the new belt is functioning correctly.

Conclusion

Regularly check and replace your vacuum cleaner belts to maintain optimal performance. Keep the spare belt in a safe place for future use.