30mm / 1 Inch Invisible Disc Adhesive Plate Hanger
Roll over image to zoom in
How to Use the Invisible Disc Adhesive Plate Hanger 30mm / 1 Inch
Materials Needed
- Invisible Disc Adhesive Plate Hanger (30mm / 1 inch)
- Ceramic or porcelain plate
- Water
- Clean cloth
- Pencil
- Ruler or measuring tape
- Wall hook or hanger
Instructions
1. Prepare the Plate
- Ensure the back surface of the plate is clean and dry.
- Use a clean cloth to wipe away any dust or grease.
2. Activate the Adhesive Disc
- Moisten the adhesive side of the disc with a small amount of water.
- Gently rub the adhesive surface until it becomes tacky.
3. Position the Adhesive Disc
- Center the disc on the back of the plate.
- Press down firmly and smooth out any air bubbles.
- Allow the adhesive to dry for at least 24 hours for best results.
4. Mark the Wall
- Decide the desired position for the plate on the wall.
- Use a pencil to mark the spot where the top of the plate will hang.
5. Install the Wall Hook
- Measure the distance from the top of the plate to the center of the disc.
- Transfer this measurement to the wall, starting from the pencil mark made earlier.
- Install a wall hook or hanger at this point.
6. Hang the Plate
- Carefully lift the plate and align the disc with the wall hook.
- Ensure the plate is securely hung and adjust if necessary.
Tips
- Check the plate’s weight capacity to ensure the disc is suitable for your plate.
- For heavier plates, use multiple discs if necessary.
Loading...
Reviews
There are no reviews yet.