3-Inch / 75MM Caster Wheel

How to Use the Castor Wheel 3″ / 75mm

Introduction

The Castor Wheel 3″ / 75mm is a versatile component designed to facilitate movement and transportation of furniture, equipment, and other items. Follow these instructions to properly install and use the castor wheel.

Installation

1. Gather Required Tools: You will need a screwdriver, screws that fit the mounting plate holes, and a drill (if pre-drilling holes).
2. Position the Wheel: Place the castor wheel at the desired location on the item you wish to attach it to, ensuring it’s aligned properly.
3. Mark Mounting Locations: Use a pencil or marker to mark where the screws will be placed through the mounting plate holes.
4. Drill Pilot Holes: (Optional) For hard surfaces, drill small pilot holes on the marked spots to facilitate easier screwing.
5. Attach the Wheel: Position the castor wheel back onto the marked locations and screw it into place using a screwdriver.
6. Repeat: If attaching multiple wheels, repeat the process for each one to ensure stability and balance.

Usage

• Ensure Stability: Before moving, make sure all castor wheels are securely attached and that the item is balanced.
• Move with Care: Gently push or pull the item, allowing the wheels to smoothly roll over the surface.
• Avoid Overloading: Do not exceed the weight capacity of the castor wheels to prevent damage.
• Lock Wheels: If the castor wheels have locking mechanisms, engage them to prevent unwanted movement when stationary.

Maintenance

• Regular Inspection: Periodically check the wheels for wear and tear or any loose screws.
• Cleaning: Clean the wheels regularly to remove debris that might hinder smooth movement.
• Lubrication: Apply lubricant to the wheel bearings if they become stiff or noisy.