290ml White Sealant for Bath & Kitchen by EVERBUILD

Description

How to Use EVERBUILD BATH & KITCHEN SEALANT WHITE 290ML

Materials Needed

• EVERBUILD Bath & Kitchen Sealant White 290ml
• Caulking gun
• Masking tape
• Utility knife
• Damp cloth
• Soap and water (for surface preparation)

Surface Preparation

1. Clean the surface where the sealant will be applied using soap and water. Remove any dirt, grease, or old sealant.
2. Ensure the surface is dry before applying the new sealant.
3. Use masking tape to outline the area to be sealed for a neat finish.

Application

1. Cut the tip of the sealant tube at a 45-degree angle using a utility knife. Ensure the opening is slightly smaller than the gap you are sealing.
2. Place the tube into the caulking gun.
3. Apply steady pressure to the caulking gun trigger and extrude the sealant along the gap, maintaining a consistent speed to ensure an even application.
4. Use a damp cloth to smooth out the sealant and remove any excess.

Finishing

1. Carefully remove the masking tape before the sealant begins to skin over.
2. Allow the sealant to cure as per the manufacturer’s instructions, typically 24 hours.
3. Avoid exposure to water and moisture during the curing process.

Cleanup

• Clean all tools and excess sealant with a damp cloth immediately after use.
• Dispose of empty sealant tubes responsibly.