20g Super Strong Adhesive Glue

Description

How to Use HARD AS NAILS SUPER GLUE 20 GM

Step 1: Prepare the Surfaces

• Ensure that the surfaces you want to bond are clean and dry.
• If necessary, lightly sand the surfaces to create a better grip.

Step 2: Open the Super Glue

• Carefully remove the cap from the super glue tube.
• If the tube is sealed, use the pointed end of the cap to puncture the seal.

Step 3: Apply the Glue

• Apply a small amount of glue to one of the surfaces. A little goes a long way!
• Avoid applying glue to both surfaces as this may cause excess glue to squeeze out when pressed together.

Step 4: Bond the Surfaces

• Press the surfaces together firmly and hold for a few seconds.
• Ensure that the surfaces are correctly aligned before the glue sets.

Step 5: Allow to Cure

• Let the glued items sit undisturbed for at least 24 hours to achieve full strength.

Step 6: Clean Up

• Wipe off any excess glue with a damp cloth before it dries.
• Replace the cap on the glue tube to prevent it from drying out.

Note: This product is for use by individuals over the age of 18. Always handle with care and keep out of reach of children.