151 Spray Paint – Neon Red, 400ml

How to Use 151 Neon Red Spray Paint 400ml

Preparation

• Ensure you are working in a well-ventilated area.
• Wear protective gear such as gloves, goggles, and a mask.
• Clean the surface you intend to paint, removing any dirt, grease, or rust.
• Shake the can vigorously for at least 1-2 minutes after the mixing ball begins to rattle.
• Test spray on a small, inconspicuous area to check compatibility and finish.

Application

• Hold the can approximately 15-25 cm (6-10 inches) away from the surface.
• Spray in a steady, sweeping motion, keeping the can parallel to the surface.
• Apply thin, even coats, allowing each coat to dry for a few minutes before applying the next.
• For best results, apply 2-3 coats.

Aftercare

• Allow the paint to dry completely. Refer to the can for drying times.
• Clean the spray nozzle by turning the can upside down and spraying until only gas comes out.
• Store the can in a cool, dry place away from direct sunlight and heat sources.

Additional Tips

• Avoid painting in humid or windy conditions.
• Use primer if the surface is porous or if a longer-lasting finish is required.
• If clogging occurs, clean the nozzle with a cloth or by soaking it in a solvent.