10-Pack of Plasplugs Fixings for Hollow Doors

Description

How to Use PLASPLUGS Hollow Door Fixings

Materials Needed

• PLASPLUGS Hollow Door Fixings (10/PK)
• Drill with appropriate drill bit
• Phillips screwdriver
• Marker or pencil
• Tape measure

Steps to Install PLASPLUGS Hollow Door Fixings

Step 1: Determine the Placement

1. Use the tape measure to find the desired location on the door where the fixing will be installed.
2. Mark the spot with a marker or pencil.

Step 2: Drill the Hole

1. Select a drill bit that matches the size of the PLASPLUGS hollow door fixing.
2. Drill a hole at the marked spot on the door. Ensure the hole is deep enough for the fixing to fit completely.

Step 3: Insert the Fixing

1. Carefully insert the PLASPLUGS hollow door fixing into the drilled hole.
2. Ensure it is flush with the door surface and properly aligned.

Step 4: Secure the Fixture

1. Position the item to be mounted over the fixing.
2. Use a Phillips screwdriver to drive a screw through the item and into the fixing.
3. Tighten until secure, being careful not to overtighten and damage the door or fixing.

Tips for Best Results

• Always double-check measurements to ensure accurate placement.
• Use appropriate safety gear, such as goggles, when drilling.
• Test the mounted item for stability before considering the job complete.