The Green Jem Threaded Tap Connector 3/4” BSP is a gardening accessory designed to connect a garden hose to an outdoor tap with a British Standard Pipe (BSP) thread size of 3/4…

How to Use the Green Jem Threaded Tap Connector 3/4” BSP

Introduction

The Green Jem Threaded Tap Connector is designed to connect a garden hose to an outdoor tap with a 3/4” BSP thread. Follow these simple steps to ensure a secure and leak-free connection.

Materials Needed

• Green Jem Threaded Tap Connector 3/4” BSP
• Garden hose with compatible fitting

Steps to Connect

1. Inspect the Tap: Ensure the outdoor tap has a 3/4” BSP thread. Clean the thread to remove any dirt or debris.
2. Attach the Connector:
   • Align the threaded end of the Green Jem Tap Connector with the tap.
   • Screw the connector onto the tap by turning it clockwise until it is hand-tight. Avoid overtightening to prevent damage to the threads.
3. Connect the Hose:
   • Attach the garden hose to the other end of the tap connector.
   • Ensure the hose fitting is securely tightened to prevent leaks.

Testing the Connection

1. Turn on the Water: Slowly turn on the water supply to the tap.
2. Check for Leaks: Inspect the connection points for any signs of leakage. If leaks are present, tighten the connections as needed.

Maintenance Tips

• Regularly check the connector for wear or damage.
• Clean the connector periodically to remove any dirt or mineral deposits.
• Store the connector in a dry place when not in use to prolong its lifespan.

Troubleshooting

• If the connector does not fit your tap, verify that the tap is 3/4” BSP.
• If there is persistent leaking, consider using a rubber washer or sealant tape for a tighter seal.