The Ultratape Hazard Warning Tape in Red & White is typically used for marking hazardous areas or creating safety zones. It measures 50mm in width and 33 meters in length. This…

Description

How to Use Ultratape Hazard Warning Tape

Materials Needed

• Ultratape Hazard Warning Tape 50mm x 33m Red & White
• Scissors or a tape cutter
• Cleaning cloth or brush

Preparation

1. Identify the area that needs hazard marking, such as steps, stairways, or walkways.
2. Ensure the surface is clean and dry. Use a cleaning cloth or brush to remove any dust, dirt, or moisture.

Application

1. Carefully unroll the Ultratape Hazard Warning Tape to the desired length.
2. Use scissors or a tape cutter to cut the tape to the required size.
3. Peel off the backing to expose the self-adhesive side of the tape.
4. Firmly press the tape onto the surface, starting from one end and smoothing out any air bubbles as you go. Ensure the tape is aligned correctly to highlight the hazard effectively.

Finishing

• Once applied, press down on the tape to ensure it is securely adhered to the surface.
• Inspect the tape to ensure it is clearly visible and properly highlights the hazardous area.

Additional Tips

• Avoid applying the tape on wet or oily surfaces to ensure effective adhesion.
• For long-term use, periodically check the tape to make sure it remains in good condition.