The ExtraStar 2 Gang 2m Extension Lead is an electrical power strip designed to extend the reach of your wall socket, enabling you to connect multiple devices simultaneously. It…

How to Use the ExtraStar 2 Gang 2m Extension Lead

Introduction

The ExtraStar 2 Gang 2m Extension Lead is a convenient tool to extend your power outlets, allowing you to connect multiple devices at a distance from your main power source. Follow the steps below to safely and effectively use the extension lead.

Safety Precautions

• Ensure the total load does not exceed the maximum rating of the extension lead.
• Avoid using in wet or damp environments to prevent electrical hazards.
• Regularly inspect the extension lead for any damage or wear.
• Do not attempt to modify or repair a damaged extension lead yourself.

Setting Up the Extension Lead

1. Uncoil the extension lead completely to prevent overheating.
2. Place the extension lead on a flat, stable surface away from foot traffic to avoid tripping hazards.

Connecting Devices

1. Insert the plug of the extension lead into a wall socket and switch on the power if required.
2. Plug your devices into the sockets on the extension lead, ensuring they are securely connected.

Disconnecting and Storage

1. Turn off and unplug all devices from the extension lead before disconnecting the lead from the wall socket.
2. Unplug the extension lead from the wall socket.
3. Coil the lead neatly for storage, avoiding any sharp bends or kinks.
4. Store the extension lead in a dry place, away from direct sunlight or heat sources.

Troubleshooting

• If the connected devices don’t power on, check that the wall socket is switched on and functioning.
• Ensure the extension lead is not overloaded with too many devices.
• Inspect the lead for any visible damage that might affect its performance.

Conclusion

By following these instructions and precautions, you can safely use the ExtraStar 2 Gang 2m Extension Lead to extend your power reach and connect multiple devices conveniently.