Product

Description

How to Use Glue Gun Glue Clear Sticks

Materials Needed

• Glue gun
• Glue gun glue clear sticks
• Protective surface or mat
• Power source (if using an electric glue gun)

Step-by-Step Instructions

1. Prepare Your Workspace

• Place a protective mat or surface to catch any dripping glue.
• Ensure your workspace is well-ventilated.

2. Insert the Glue Stick

• Take one glue stick from the pack.
• Insert the glue stick into the back of the glue gun.

3. Heat the Glue Gun

• Plug in or switch on the glue gun to allow it to heat up.
• Wait for a few minutes until the glue gun is fully heated. The glue will start flowing easily when it’s ready.

4. Test the Glue Flow

• Squeeze the trigger gently to test the flow of the glue.
• If the glue flows smoothly, your glue gun is ready to use.

5. Apply the Glue

• Position the glue gun over the area where you want to apply glue.
• Squeeze the trigger gently to dispense the glue.
• Release the trigger to stop the flow of glue.

6. Allow the Glue to Set

• Let the glue cool and harden for a few minutes.
• Ensure the glue is fully set before handling the glued object.

Safety Tips

• Always handle the glue gun by its handle to avoid burns.
• Do not touch the nozzle of the glue gun as it becomes very hot.
• Unplug or switch off the glue gun when not in use.