**M10**: This indicates the diameter of the fixing, which is 10 millimeters

How to Use M10 x 115/120 DIY Builders Fixings Nylon Frame Fixings

Materials Needed

• M10 x 115/120 Nylon Frame Fixings (2 in a pack)
• Drill with appropriate drill bit
• Screwdriver
• Measuring tape
• Pencil or marker
• Safety glasses
• Dust mask (optional)

Step-by-Step Instructions

1. Prepare the Area

• Identify the location where you need to use the fixings.
• Clear the area of any obstructions or debris.
• Wear safety glasses and a dust mask to protect yourself.

2. Measure and Mark

• Use a measuring tape to determine the exact location for the fixings.
• Mark the drilling points with a pencil or marker.

3. Drill Holes

• Select a drill bit that matches the diameter of the fixings.
• Drill into the marked points at the required depth (115/120 mm).
• Ensure the holes are clean and free of dust.

4. Insert Nylon Frame Fixings

• Take the nylon frame fixings from the pack.
• Insert each fixing into the drilled holes, ensuring they fit snugly.

5. Secure the Fixings

• Use a screwdriver to secure the fixings into place by tightening them.
• Ensure the fixings are firmly anchored and do not move.

6. Final Checks

• Inspect the installed fixings to ensure they are secure and aligned correctly.
• Make any necessary adjustments for stability.

Safety Tips

• Always wear safety glasses when drilling.
• Ensure the drill bit is properly secured before use.
• Keep hands and fingers away from the drill bit at all times.