Kingfisher Multi-Function Tap Connector

Description

How to Use the Kingfisher Multi Tap Connector

Step 1: Verify Your Age

1. Visit the website kdwholesale.co.uk.
2. A pop-up will appear asking for age verification.
3. Click “Enter” to confirm that you are over the age of 18.
4. If you are under 18, click “Exit” and do not proceed further.

Step 2: Gather Your Materials

• Kingfisher Multi Tap Connector
• Garden hose
• Water supply with a compatible tap

Step 3: Install the Connector

1. Ensure the water supply is turned off before installation.
2. Attach the Kingfisher Multi Tap Connector to your tap by screwing it onto the tap’s threaded end.
3. Ensure the connection is secure and tight to prevent leaks.

Step 4: Connect the Hose

1. Take your garden hose and attach it to the available outlet on the multi tap connector.
2. Make sure the hose is securely attached to avoid disconnections during use.

Step 5: Turn on the Water Supply

1. Slowly turn on the water supply to check for any leaks.
2. If there are leaks, ensure all connections are tightened properly.

Step 6: Use as Needed

• Direct the water flow from the hose to your desired location.
• Adjust the flow or switch between outlets if your connector has multiple outlets.

Step 7: Disconnect After Use

1. Turn off the water supply once you have finished using the connector.
2. Detach the hose from the connector.
3. Unscrew the multi tap connector from the tap if needed.

Enjoy the convenience of your Kingfisher Multi Tap Connector for efficient gardening and outdoor tasks!