Tetrion Interior Filler Easy-On 500g

How to Use Tetrion Easy On Interior Filler 500GM

Step 1: Gather Your Materials

• Tetrion Easy On Interior Filler 500GM
• Spatula or filling knife
• Sandpaper
• Clean cloth
• Protective gloves

Step 2: Prepare the Surface

1. Ensure the surface you are filling is clean, dry, and free from dust or grease.
2. Use sandpaper to smooth out any rough edges around the area to be filled.
3. Wipe the area with a clean cloth to remove any dust particles.

Step 3: Apply the Filler

1. Open the Tetrion Easy On Interior Filler container.
2. Using a spatula or filling knife, scoop a small amount of filler.
3. Apply the filler to the damaged area, pressing firmly to ensure it adheres well.
4. Smooth the surface of the filler with the spatula or knife, removing any excess material.

Step 4: Allow to Dry

1. Leave the filler to dry completely. This may take a few hours depending on the depth of the filled area.
2. Check the manufacturer’s instructions for specific drying times.

Step 5: Sand and Finish

1. Once the filler is dry, use sandpaper to smooth out the surface until it is flush with the surrounding area.
2. Wipe away any sanding dust with a clean cloth.
3. The surface is now ready for painting or further decoration.

Additional Tips

• Always wear protective gloves when handling the filler.
• Store the filler in a cool, dry place when not in use.
• For best results, follow any additional instructions provided by the manufacturer.