Description
How to Use SHAW X NO.5 Stainless Steel Picture Wire
Materials Needed
- SHAW X NO.5 Stainless Steel Picture Wire
 - Picture hooks or eye screws
 - Wire cutters
 - Measuring tape
 - Pencil
 - Level (optional)
 
Step-by-Step Instructions
Step 1: Determine the Wire Length
- Measure the width of the frame you wish to hang.
 - Add an additional 10-15 cm (4-6 inches) to allow for twisting and securing the wire.
 - Cut the wire to the determined length using wire cutters.
 
Step 2: Attach the Wire to the Frame
- Install picture hooks or eye screws on the back of the frame. Position them about one-third of the way down from the top.
 - Insert one end of the wire through the eye of one hook or screw.
 - Twist the wire securely around itself several times to ensure it is tight.
 
Step 3: Secure the Other End
- Stretch the wire across the back of the frame, pulling it taut.
 - Thread the other end of the wire through the opposite hook or screw.
 - Twist the wire around itself securely, similar to the first side.
 
Step 4: Prepare for Hanging
- Find the desired location on the wall to hang your picture.
 - Use a pencil to mark the spot where the hook will be placed.
 - Install the appropriate wall hook or nail at the marked spot.
 - Use a level to ensure the mark is straight if necessary.
 
Step 5: Hang the Picture
- Carefully hang the picture frame on the wall hook, using the wire.
 - Adjust the frame as needed to ensure it is level.
 
Additional Tips
- Ensure that the total weight of the picture does not exceed 19.5 kg (43 lbs), as this is the maximum capacity of the wire.
 - Regularly check the wire’s condition to ensure it remains secure over time.
 
				
    








Azhar (verified owner) –
I trust this wholesaler for all my business needs. The products are always great quality, and the customer service is fantastic.
Fatima (verified owner) –
The products were perfect and the shipping was lightning fast. I couldn’t be more pleased with my experience with this wholesaler.