Securplumb SU9762 Angled Chrome-Plated Washing Machine Tap 15mm x 3/4

How to Use the SECURPLUMB SU9762 Washing Machine Tap

Introduction

The SECURPLUMB SU9762 is an angled washing machine tap designed for easy installation and use. This guide will help beginners understand how to properly use this product.

Tools Required

• Adjustable wrench
• PTFE tape
• A bucket or container (optional for catching water)

Installation Steps

1. Before starting, ensure that the main water supply is turned off.
2. Wrap PTFE tape around the threads of the 15mm pipe to ensure a tight seal.
3. Attach the 15mm end of the tap to the water supply pipe by screwing it on securely. Use the adjustable wrench to tighten it, making sure not to over-tighten.
4. Connect the 3/4 inch end of the tap to the washing machine hose. Again, ensure it is tight using the adjustable wrench.

Using the Tap

1. Turn the main water supply back on.
2. To start the water flow, turn the handle of the tap to the open position.
3. To stop the water flow, turn the handle to the closed position.

Maintenance Tips

• Periodically check for leaks around the connections and tighten if necessary.
• If the tap becomes stiff to operate, consider applying a suitable lubricant to the moving parts.

Safety Precautions

• Ensure the water pressure is within the recommended limits to prevent damage.
• Always turn off the water supply before attempting any repairs or maintenance.

Troubleshooting

• If there is a leak, check that all connections are tight and that PTFE tape is applied correctly.
• If the water does not flow, ensure the main water supply is turned on and that there are no blockages in the hose.

By following these instructions, you will be able to successfully install and use your SECURPLUMB SU9762 washing machine tap.