STATUS 13A SINGLE / 1-GANG SWITCHED WALL OUTLET

How to Use the STATUS 13A Single / 1 Gang Switch Wall Socket

1. Safety Precautions

• Ensure the power supply is turned off at the mains before installation.
• Always follow electrical safety guidelines when handling electrical components.
• If unsure, consult a qualified electrician for installation.

2. Tools Required

• Screwdriver
• Voltage tester
• Wire strippers

3. Installation Steps

1. Remove the Existing Socket:
   • Use a screwdriver to remove the screws on the existing socket.
   • Gently pull the socket away from the wall to expose the wiring.
2. Prepare the Wires:
   • Use a voltage tester to ensure no current is flowing through the wires.
   • If needed, use wire strippers to expose the copper ends of the wires.
3. Connect the New Socket:
   • Connect the live (brown) wire to the terminal marked “L”.
   • Connect the neutral (blue) wire to the terminal marked “N”.
   • Connect the earth (green/yellow) wire to the terminal marked with the earth symbol.
4. Secure the Socket:
   • Push the socket back into the wall box carefully.
   • Use a screwdriver to secure the socket with screws.
5. Test the Socket:
   • Turn the power back on at the mains.
   • Use a voltage tester to ensure the socket is functioning correctly.

4. Usage Tips

• Ensure the socket is not overloaded with too many devices.
• Regularly check for any signs of wear or damage.
• Keep the socket clean and free from dust accumulation.

5. Troubleshooting

• If the socket does not work, ensure all connections are secure and correct.
• If there are frequent issues, consult a qualified electrician for advice.