SECURIT S2961 Chrome Number 1, 75mm

How to Use the SECURIT S2961 Chrome Numeral No.1 75mm

Step 1: Gather Necessary Tools

• Drill or screwdriver
• Measuring tape
• Pencil
• Level
• Appropriate screws (if not included with the numeral)

Step 2: Choose the Location

• Decide where you want to place the numeral, such as on a door or a wall.
• Ensure the location is clean and flat for optimal attachment.

Step 3: Measure and Mark

• Use the measuring tape to determine the exact position for the numeral.
• Mark the position lightly with a pencil.
• Use a level to ensure the numeral will be straight.

Step 4: Attach the Numeral

• Align the numeral over the marked location.
• If using screws:
  • Drill pilot holes into the marked spots if necessary.
  • Secure the numeral using the screws and a screwdriver or drill.
• If adhesive is used (if applicable):
  • Apply the adhesive to the back of the numeral.
  • Firmly press the numeral onto the marked location and hold until secure.

Step 5: Final Check

• Use the level to ensure the numeral is straight and properly aligned.
• Make any necessary adjustments promptly before the numeral is fully set.

Step 6: Clean Up

• Remove any pencil marks if visible.
• Dispose of or store any remaining tools and materials.

Congratulations! You have successfully installed your SECURIT S2961 Chrome Numeral No.1 75mm.