EVERBUILD 20G INDUSTRIAL SUPERGLUE FOR GENERAL USE

How to Use EVERBUILD SUPERGLUE INDUSTRIAL GENERAL USE 20G

1. Preparation

• Ensure the surfaces to be bonded are clean, dry, and free from dust, grease, and oil.
• For best results, lightly sand the surfaces before applying the glue.
• Have a damp cloth ready to clean up any excess glue immediately.
• Open the product carefully, following any specific packaging instructions.

2. Application

• Apply a small amount of superglue to one of the surfaces. A little goes a long way.
• Quickly press the two surfaces together, ensuring they are aligned correctly.
• Apply even pressure for a few seconds to ensure a strong bond.

3. Curing

• Allow the bond to cure. The glue typically sets in seconds, but for full strength, leave it for 24 hours.
• Avoid moving or putting stress on the bonded surfaces during this time.

4. Safety Tips

• Always use in a well-ventilated area to avoid inhaling fumes.
• Wear protective gloves to prevent skin contact.
• If glue comes into contact with skin, wash immediately with warm soapy water.
• Keep out of reach of children and pets.

5. Storage

• After use, clean the nozzle and tightly replace the cap to prevent the glue from drying out.
• Store in a cool, dry place away from direct sunlight.