SECURIT S1463 63MM BRASS HASP AND STAPLE

How to Use the Securit S1463 Brass Hasp & Staple 63mm

Introduction

The Securit S1463 Brass Hasp & Staple is a simple and effective way to secure doors, gates, sheds, and cabinets. Follow these steps to install and use it properly.

Tools Required

• Screwdriver
• Drill (optional, for pilot holes)
• Pencil
• Measuring tape
• Level

Installation Steps

Step 1: Choose the Location

• Select the area where you want to install the hasp and staple.
• Ensure the location allows the hasp to close securely over the staple.

Step 2: Mark the Position

• Use a pencil and measuring tape to mark the exact spots where the screws will be placed.
• Ensure alignment using a level for a straight installation.

Step 3: Drill Pilot Holes (Optional)

• If the material is hard, use a drill to create pilot holes where you marked the screw positions.
• This will make it easier to insert the screws and prevent material cracking.

Step 4: Attach the Hasp

• Place the hasp on the marked location on the door or lid.
• Secure it in place using screws and a screwdriver.

Step 5: Attach the Staple

• Position the staple on the frame or adjacent surface where the hasp will latch.
• Attach it securely using the screws provided.

Usage Instructions

• Close the hasp over the staple to secure the door or lid.
• Insert a padlock through the staple loop for added security (padlock not included).

Maintenance Tips

• Regularly check the screws to ensure they remain tight.
• Lubricate the hasp hinge periodically to prevent rust and ensure smooth operation.

Safety Precautions

• Ensure the hasp and staple are installed on sturdy surfaces.
• Do not place fingers near the staple when closing the hasp to avoid injury.