3-Piece Door Stopper Set with Fittings by DID

How to Use the DID 3PC Door Stopper Set

Introduction

The DID 3PC Door Stopper Set is designed to prevent doors from slamming and to protect walls from damage. This guide will help beginners understand how to install and use the set effectively.

Contents of the Set

• 3 Door Stoppers
• Fittings (Screws and Anchors)

Tools Required

• Drill
• Screwdriver
• Pencil
• Measuring Tape

Steps for Installation

1. Choose the Location: Decide where you want to install the door stopper. Ideally, it should be located on the wall or floor where the door typically swings open.
2. Mark the Spot: Use a pencil to mark the exact spot on the wall or floor where the stopper will be placed.
3. Drill the Hole: Using a drill, make a hole at the marked spot for the anchor. Ensure the hole is slightly smaller than the anchor for a snug fit.
4. Insert the Anchor: Place the anchor into the drilled hole, tapping it gently with a hammer if necessary.
5. Attach the Door Stopper: Align the door stopper with the anchor and use the provided screws to secure it in place using a screwdriver.

Testing the Door Stopper

• Gently open the door to ensure it makes contact with the stopper.
• Check that the stopper holds the door securely and prevents it from hitting the wall.

Maintenance Tips

• Regularly check the screws to ensure they remain tight.
• Clean the door stoppers occasionally with a damp cloth to remove dust and debris.

Conclusion

By following these steps, beginners can easily install and use the DID 3PC Door Stopper Set to protect their walls and doors. Enjoy a more peaceful and damage-free environment!