DEKTON 40 GRIT FLEXIBLE COARSE SANDING BLOCK

How to Use the DEKTON Flexible Coarse Sanding Block 40 Grit

Materials Needed

• DEKTON Flexible Coarse Sanding Block 40 Grit
• Protective gloves
• Protective eyewear
• Dust mask (optional)
• Surface to be sanded
• Clean cloth for wiping

Step-by-Step Guide

Step 1: Prepare the Surface

1. Ensure the area to be sanded is clean and dry.
2. Remove any loose debris or particles from the surface.

Step 2: Safety First

1. Put on protective gloves to safeguard your hands.
2. Wear protective eyewear to shield your eyes from dust.
3. Consider wearing a dust mask to prevent inhalation of fine particles.

Step 3: Begin Sanding

1. Hold the sanding block firmly in your hand.
2. Start sanding the surface, applying even pressure.
3. Sand in the direction of the grain for wooden surfaces.
4. Use circular motions for other materials.

Step 4: Check Your Progress

1. Periodically stop sanding and wipe the surface with a clean cloth.
2. Check for smoothness and consistency across the surface.
3. Continue sanding as needed until the desired finish is achieved.

Step 5: Clean Up

1. Once satisfied with the sanding, thoroughly wipe down the surface to remove any remaining dust.
2. Clean the sanding block with a brush or tap it gently to remove accumulated dust.

Tips for Best Results

• Always sand in a well-ventilated area to minimize dust inhalation.
• Regularly check the condition of the sanding block and replace it if it becomes worn out.
• For finer finishes, consider using a higher grit sanding block after using the 40 grit.