FAST PAK VALUE 0690 M6 X 25MM ZINC PLATED PENNY WASHERS – PACK OF 15

How to Use FAST PAK VALUE 0690 M6 X 25MM Penny Washers Zinc

Introduction

Penny washers are used to distribute the load of a threaded fastener, such as a screw or nut. They are commonly used in applications where the fastener hole is larger than the fastener head or to prevent the fastener from pulling through a material.

Materials Required

• FAST PAK VALUE 0690 M6 X 25MM Penny Washers Zinc
• Appropriate size screws or bolts (M6)
• Wrench or screwdriver

Step-by-Step Instructions

Step 1: Prepare the Surface

• Ensure that the surface where the washer will be applied is clean and dry.
• Align the components you want to fasten together.

Step 2: Insert the Washer

• Place the penny washer over the hole of the component you are fastening.
• Make sure the washer is centered over the hole.

Step 3: Insert the Fastener

• Insert the screw or bolt through the washer and into the material.
• Ensure that the fastener is properly aligned with the washer and the hole.

Step 4: Secure the Fastener

• Use a wrench or screwdriver to tighten the fastener.
• Ensure the washer remains flat against the surface as you tighten.
• Do not overtighten to avoid damaging the washer or the material.

Tips and Warnings

• Use the appropriate fastener length for the thickness of your materials.
• Check periodically to ensure the fastener remains tight.